Yamaha AG-Stomp Panduan Pemilik - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Penguat Yamaha AG-Stomp. Yamaha AG-Stomp 32 halaman. Yamaha accoustic guitar/pre-amplifier owner's manual
Juga untuk Yamaha AG-Stomp: Panduan Servis (45 halaman), Daftar Tambalan (1 halaman), Manual (Belanda) (32 halaman)

Halaman Cetak

Nomenclature

!5 Feedback Reduction Buttons

(FEEDBACK REDUCTION 1-5)

These switches are notch filters that are used to

eliminate feedback. The five notch filters can be used

to isolate and suppress those frequencies that are

causing the feedback.

The notch filter's lamp will light when the correspond-

ing band's filter is active. Up to five notch filters can

be used simultaneously.

!6 Frequency Control (FREQ)

Sets the frequency of the selected Feedback

Reduction's Notch Filter. (→ page 16)

!7 DEPTH Control

Sets the depth of the selected Feedback Reduction's

Notch Filter. (→ page 16)

!8 CHORUS/DELAY Effect Buttons

These buttons select the Chorus and Delay effects.

The currently selected effect's lamp will light.

G Footswitch Section

@4 Footswitches 1, 2, 3

Depending upon the settings in the Utility Mode (→

page 24), these switches can operate in the follow-

ing manner:

• Select a patch (1/2/3) from the currently selected Bank.

• Switch the Effect Blocks ON/OFF (1: Limiter, 2: Chorus/De-

lay, 3: Reverb)

!9 SPEED/TIME Control

Chorus effect: Sets the speed of the Chorus.

Delay effect: Sets the Delay time.

@0 DEPTH/FEEDBACK Control

Chorus effect: Sets the depth of the Chorus effect.

Delay effect: Sets how long the delay will repeat.

@1 LEVEL

Chorus effect: Sets the volume level of the Chorus

effect.

Delay effect: Sets the volume level of the Delay ef-

fect.

@2 Reverb Effect Buttons

(HALL/ROOM/PLATE)

These buttons select the type of reverb effect to be

used. The currently selected effect's lamp will light.

@3 REVERB Volume

Sets the amount of Reverb that is added to the

guitar's tone.

@5 Bank Switch (AUTO F.R./BANK/TUNER)

• Press the switch when feedback occurs: The

AG-Stomp will automatically identify the prob-

lem frequency and apply a notch filter. (→ page

16)

• Hold the switch until the display flashes: Use

Footswitch 1 to change the Area, Footswitch 2

or 3 to select the Bank. (→ page 18)

• Hold the switch until "

play: Enters the Tuner Mode. (→ page 23)

" appears in the dis-