Yamaha AX-470 Panduan Pemilik - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Penguat Yamaha AX-470. Yamaha AX-470 14 halaman. Natural sound stereo integrated amplifier
Juga untuk Yamaha AX-470: Panduan Servis (24 halaman)

Halaman Cetak

STANDBY mode

For AX-470 and Europe model of AX-570

While the power is on, pressing the POWER key on the remote

control transmitter switches the unit to the STANDBY mode.

(In this mode, the indicator is half illuminated.)

Note

The POWER switch on the front panel of this unit should

be turned off when left unused for a long period of time.

NOTES ABOUT THE REMOTE CONTROL TRANSMITTER

Battery installation

Battery replacement

If you find that the remote control transmitter must be used

closer to the main unit, the batteries are weak. Replace both

batteries with new ones.

Notes

Use only AA, R6, UM-3 batteries for replacement.

Be sure the polarities are correct. (See the illustration inside

the battery compartment.)

Remove the batteries if the remote control transmitter will

not be used for an extended period of time.

If batteries leak, dispose of them immediately. Avoid

touching the leaked material or letting it come in contact with

clothing, etc. Clean the battery compartment thoroughly

before installing new batteries.

AX-470

POWER on mode

Europe model of AX-570

POWER on mode

Remote control transmitter operation range

Remote control

sensor

Notes

There should be no large obstacles between the remote

control transmitter and the main unit.

If the remote control sensor is directly illuminated by strong

lighting (especially an inverter type of fluorescent lamp etc.),

it might cause the remote control transmitter not to work

correctly. In this case, reposition the main unit to avoid

direct lighting.

STANDBY mode

Within approximately

7 m (23 feet)