Yamaha AX-596 Panduan Servis - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Servis untuk Penguat Yamaha AX-596. Yamaha AX-596 26 halaman. Stereo amplifier
Juga untuk Yamaha AX-596: Panduan Pemilik (19 halaman), Katalog Produk (44 halaman), Panduan Servis (26 halaman)

Yamaha AX-596 Panduan Servis

TO SERVICE PERSONNEL

1. Critical Components Information
Components having special characteristics are marked s
and must be replaced with parts having specifications equal
to those originally installed.
2. Leakage Current Measurement (For 120V Models Only)
When service has been completed, it is imperative to verify
that all exposed conductive surfaces are properly insulated
from supply circuits.
Meter impedance should be equivalent to 1500 ohm shunted
by 0.15µF.
Leakage current must not exceed 0.5mA.
Be sure to test for leakage with the AC plug in both polarities.
WARNING: CHEMICAL CONTENT NOTICE!
The solder used in the production of this product contains LEAD. In addition, other electrical/electronic and /or plastic
(where applicable) components may also contain traces of chemicals found by the California Health and Welfare Agency
(and possibly other entities) to cause cancer and/or birth defects or other reproductive harm.
DO NOT PLACE SOLDER, ELECTRICAL/ELECTRONIC OR PLASTIC COMPONENTS IN YOUR MOUTH FOR ANY REA-
SON WHATSOEVER!
Avoid prolonged, unprotected contact between solder and your skin! When soldering, do not inhale solder fumes or expose
eyes to solder/flux vapor!
If you come in contact with solder or components located inside the enclosure of this product, wash your hands before
handling food.

IMPEDANCE SELECTOR

AX-596
2