Yamaha CX-A5200 Panduan Pemilik - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Penguat Yamaha CX-A5200. Yamaha CX-A5200 28 halaman. Av
Juga untuk Yamaha CX-A5200: Contoh Koneksi (2 halaman)

Halaman Cetak

If you notice any abnormality

• If any of the following abnormalities occur, immediately turn off the power and disconnect the

power plug. If any of the following abnormalities occur, immediately turn off any amplifiers

and receivers.

- The power cord/plug is damaged.

- An unusual smell or smoke is emitted from the unit.

- Foreign material gets into the interior of the unit.

- There is a loss of sound during use.

- There is a crack or damage in the unit.

Continued use could cause electric shocks, a fire, or malfunctions. Immediately request an

inspection or repair from the dealer where you purchased the unit or from qualified Yamaha

service personnel.

• Be careful not to drop or apply strong impact to this unit. If you suspect the unit may have

been damaged due to dropping or impact, immediately turn off the power and pull the power

plug from the AC outlet. Failure to observe this may cause electric shocks, a fire, or

malfunctions. Immediately request an inspection from the dealer where you purchased the

unit or from qualified Yamaha service personnel.

CAUTION

This content indicates "risk of injury."

Power supply/power cord

• Do not use an AC outlet where the power plug fits loosely when inserted. Failure to observe

this may cause a fire, electric shocks, or burns.

• When removing the electric plug from the unit or an AC outlet, always hold the plug itself and

not the cord. Pulling by the cord can damage it and cause electric shocks or a fire.

• Insert the power plug firmly all the way into the AC outlet. Using the unit when it is not

plugged in sufficiently can cause dust to accumulate on the plug, causing a fire or burns.

Installation

• Do not place the unit in an unstable position where it might accidentally drop or fall over and

cause injuries.

• Do not block this unit's ventilation holes (cooling slits). This unit has ventilation holes on the

top/side/bottom to prevent the internal temperature from becoming too high. Failure to

observe this may trap heat inside the unit, causing a fire or malfunctions.

• When installing this unit:

- Do not cover it with any cloth.

- Do not install it on a carpet or rug.

- Make sure the top surface faces up; do not install on its sides or upside down.

- Do not use the device in a confined, poorly-ventilated location.

PRECAUTIONS

Failure to observe the above may trap heat inside the unit, causing a fire or malfunctions.

Ensure that there is adequate space around the unit: at least 30 cm (11-3/4 in) on top, 20 cm

(7-7/8 in) on the sides, and 20 cm (7-7/8 in) on the rear.

• Do not install the unit in places where it may come into contact with corrosive gases or salt

air

Doing so may result in malfunction.

• Avoid being near the unit during a disaster, such as an earthquake. Since the unit may turn

over or fall and cause injury, quickly move away from the unit and go to a safe place.

• Before moving this unit, be sure to turn off the power switch and disconnect all connection

cables. Failure to observe this may damage the cables or cause you or someone else to trip

and fall.

• When transporting or moving the unit always use two or more people. Attempting to lift the

unit by yourself may damage your back, result in other injury, or cause damage to the unit

itself.

Hearing loss

• Do not use the unit/speakers for a long period of time at a high or uncomfortable volume

level, since this can cause permanent hearing loss. If you experience any hearing loss or

ringing in the ears, consult a physician.

• Before connecting the unit to other devices, turn off the power for all devices. Also, before

turning the power of all devices on or off, make sure that all volume levels are set to the

minimum. Failing to do so may result in hearing loss, electric shock, or device damage.

• When turning on the AC power in your audio system, always turn on the unit LAST, to avoid

hearing loss and speaker damage. When turning the power off, the unit should be turned off

FIRST for the same reason. Failure to observe the above may cause hearing impairment or

speaker damage.

Maintenance

• Remove the power plug from the AC outlet before cleaning the unit. Failure to observe this

may cause electric shocks.

Handling caution

• Do not touch the surface having this label. Doing so may cause burns. The label

on the device indicates that the surface to which the label is attached may

become hot during operation.

• Do not insert your hand or fingers into the ventilation holes of this unit. Failure to observe this

may cause injury.

• Do not insert foreign materials such as metal or paper into the ventilation holes of this unit.

Failure to observe this may cause a fire, electric shocks, or malfunctions. If foreign material

gets into the unit, immediately shut off the power and pull the power plug from the AC outlet

and request an inspection from the dealer where you purchased the unit or from qualified

Yamaha service personnel.

• Keep small parts out of the reach of infants. Your children may accidentally swallow them.