Yamaha THR10 Panduan Pemilik - Halaman 11
Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Penguat Yamaha THR10. Yamaha THR10 23 halaman. Thr series
Juga untuk Yamaha THR10: Panduan Pemilik (21 halaman), Panduan Pemilik (22 halaman), Manual (14 halaman), Panduan Pemilik (20 halaman), Panduan Pemilik (20 halaman)
n Tips on Creating Sound
Use the BLEND/GAIN
amount of direct pickup sound with the mic
simulation sound when any mic type (except
for EG CLN) is selected. Control the guitar's
volume with the VOLUME
Mic/Amp Type Descriptions: THR5A
CONDENSER:
The condenser microphone
setting gives the acoustic guitar a rich,
midrange tone.
DYNAMIC:
The dynamic microphone setting
gives the acoustic guitar a tight tonal core.
TUBE:
The tube microphone setting gives the
acoustic guitar a rich midrange tone.
NYLON:
Perfect for use with an acoustic-
electric classical or nylon string guitar.
EG CLN:
This setting is designed for electric
guitars and delivers a clear, rich, clean
tone characteristic of an American combo
amp and the characteristic sound of a 12-
inch speaker cabinet.
t GAIN (THR10/10C/10X and THR5 only)
Adjusts the amount of guitar distortion.
Rotate the knob clockwise to increase the
amount of distortion.
* On the THR10/10C, the blend function, which
blends the pickup direct sound with the mic simu-
lation sound, is active when ACO is selected with
the AMP r control. (Setting the blend function
to its minimum level produces the pickup direct
sound only while a maximum setting produces
the mic sound only.)
t BLEND/GAIN (THR5A only)
Blends the direct sound of the pickup with
the sound of the mic simulation when a
MIC TYPE
other than EG CLN is selected
r
(the minimum setting is direct sound only,
maximum setting is microphone only).
When EG CLN is selected as the MIC TYPE
, it adjusts the amount of distortion in the
r
knob to mix the
t
knob.
!4
guitar sound. Turning the knob clockwise
increases the amount of distortion.
y MASTER
Adjusts the volume for the amp section.
Rotate the knob clockwise to increase
volume while reproducing compression and
poweramp distortion of the simulated amp.
* Only adjusts the volume when BASS, ACO,
or FLAT is selected with the AMP r control
(THR10/10C/10X only).
* On the THR5A, this control only adjusts the
volume when a MIC TYPE r other than EG CLN is
selected.
u BASS (THR10/10C/10X only)
Tone adjustment for the guitar's sound.
Rotate the knob clockwise to enhance the
low range frequencies.
i MIDDLE (THR10/10C/10X only)
Tone adjustment for the guitar's sound.
Rotate the knob clockwise to enhance the
mid-range frequencies.
o TREBLE (THR10/10C/10X only)
Tone adjustment for the guitar's sound.
Rotate the knob clockwise to enhance the
high-range frequencies.
!0 TONE (THR5/5A only)
Tone adjustment for the guitar's sound.
Rotate the knob clockwise to brighten the
sound and counterclockwise to darken it.
!1 EFFECTS
On the THR10/10C/10X, or THR5, this
selects one of the four different effects;
CHORUS, FLANGER, PHASER, and TREM-
OLO.
On the THR5A, this selects one of the three
different effects; COMPRESSOR, COMPRES-
SOR/CHORUS, and CHORUS.
Names And Functions
11