Yamaha THR10II Wireless Panduan Referensi - Halaman 9
Jelajahi secara online atau unduh pdf Panduan Referensi untuk Penguat Yamaha THR10II Wireless. Yamaha THR10II Wireless 20 halaman.
Juga untuk Yamaha THR10II Wireless: Panduan Cepat (2 halaman)
Halaman Cetak
Charging to the built‐in rechargeable battery (THR-II Wireless only)
Connect the supplied power adaptor to the DC IN jack located on the rear side of the THR-II Wireless. The LED
of the power button lights in green while charging.
* For further details of the Power Button LED state, refer to the THR30II Wireless, THR10II Wireless* Power Button LED status
list
(page
17).
NOTE
• When you use the THR-II Wireless in an environment of extreme temperatures, charging may not be
possible.
Charging the Relay G10T (THR-II Wireless only)
Connect the Relay G10T to the [INPUT] jack located on the top of the THR-II Wireless. The built‐in rechargeable
battery starts charging automatically.
* When you resume charging after pulling out the Relay G10T from the INPUT jack of the THR-II Wireless, connect the Relay
G10T to the INPUT jack after more than 2 seconds.
* If the supplied power adapter is not connected to the THR-II Wireless, charging of the Relay G10T will not start.
* Refer to the manual of Relay G10T for the meaning of LED display indications on the Relay G10T.
NOTE
• After charging, unplug the Relay G10T from the THR-II Wireless.
• When the THR-II Wireless is turned off and the power adapter is connected, the Relay G10T is
charged by simply connecting. However, the THR-II Wireless is initially set to turn off the power
when the Relay G10T charging is finished. In this state, leaving the Relay G10T connected to the
THR-II Wireless may result in discharge of the Relay G10T's battery.
• You can release the setting that turn off the power of the THR-II Wireless automatically, after the
Relay G10T is charged, with the THR Remote.
Connecting to guitar by wireless (THR-II Wireless only)
The THR-II Wireless can connect with the Relay G10T wireless guitar transmitter (made by LINE6) by wireless.
Moreover, the optimal channel is set automatically by connecting the Relay G10T to the [INPUT] jack located on
the top of the THR-II Wireless for at least 10 seconds. For details on wireless connection, refer to the Relay
G10T's manual.
THR30II Wireless THR10II Wireless THR10II
Connection
Reference Manual
9