Yamaha ATS-1050 Panduan Pemilik - Halaman 15

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Sistem Pembicara Yamaha ATS-1050. Yamaha ATS-1050 43 halaman. Front surround system
Juga untuk Yamaha ATS-1050: Panduan Memulai Cepat (2 halaman)

Halaman Cetak

Teach the sound bar the "Volume (–)" code of the TV's remote control.

6-1

Press

(volume -) on the rear panel of the sound bar.

6-2

While pointing your TV's remote control at the remote control sensor, hold

down the volume (–) key for more than 1 second twice or three times.

Result

Bleep/buzzer Indicators

Successfully

Once

learned

Failed to learn

* Repeat from

Twice

Step 6-1.

Teach the sound bar the "Volume (+)" code of the TV's remote control.

7-1

Press

(volume +) on the rear panel of the sound bar.

7-2

While pointing your TV's remote control at the remote control sensor, hold

down the volume (+) key for more than 1 second twice or three times.

Result

Bleep/buzzer Indicators

Successfully

Once

learned

Failed to learn

* Repeat from

Twice

Step 7-1.

Lights up

Flash

Lights up

Flash

Teach the sound bar the "Power" code of the TV's remote control.

8-1

Press

(power) on the rear panel of the sound bar.

8-2

While pointing your TV's remote control at the remote control sensor, hold

down the power key for more than 1 second twice or three times.

Result

Bleep/buzzer Indicators

Successfully

Once

learned

Failed to learn

* Repeat from

Twice

Step 8-1.

To finish the learning mode, press the LEARN key on the sound bar's

remote control.

This completes the necessary settings. Now you can operate the sound bar with

the TV's remote control's mute key, volume keys, or power key.

HINT

• The learning mode will be finished automatically if no operations are performed for 5 minutes.

• Set the TV volume to minimum. When you turn up the volume of the sound bar with the TV's remote

control, the volume of the TV may be turned up at the same time. In this case, follow Step 3 in

"Connections" (p.6) to change the TV setting.

• You can press the

(power) key on the sound bar's remote control to finish learning mode.

Lights up

Flash