Yamaha ATS-2070 Panduan Pemilik - Halaman 36
Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Sistem Pembicara Yamaha ATS-2070. Yamaha ATS-2070 46 halaman. Front surround system
Juga untuk Yamaha ATS-2070: Panduan Pemilik (42 halaman), Manual Pembaruan (7 halaman), Panduan Servis (50 halaman)
Halaman Cetak
Troubleshooting
Refer to the table below when the unit does not function properly. If the problem you are experiencing is not listed below or if the instructions
below do not help, turn off the unit, disconnect the power cables of the center unit and subwoofer, and contact the nearest authorized Yamaha
dealer or service center.
First, check the following:
1 The power cables of the center unit, subwoofer, TV and playback devices (such as BD/DVD players) are connected to AC wall outlet
securely.
2 The center unit, subwoofer, TV and playback devices (such as BD/DVD players) are turned on.
3 The connectors of each cable are securely inserted into jacks on each device.
Power and system
Problem
The power turns off
suddenly.
The power cannot be turned
on.
36
En
Cause
When the auto power standby function is enabled, the unit
automatically turns off in any of the following situations:
- No operations have been performed for 8 hours
- BLUETOOTH or HDMI is selected as the input source,
but no audio has been input to the unit or no operations
have been performed with the unit for more than 20
minutes.
The protection circuitry has been activated. (The
DTS indicator on the center unit flashes.)
The Bluetooth connection was terminated by a Bluetooth
device with the unit's Bluetooth standby function enabled.
The protection circuitry has been activated three times
consecutively. (If you try to turn on the power in this
condition, the
DD / DTS indicator on the center unit will
flash.)
Turn on the unit again. If the auto power standby function is not
used, disable the function (p. 35).
DD /
After confirming that all connections are made properly, turn on
the unit again. If the power still turns off frequently, unplug the
power cable from the AC wall outlet and contact the nearest
authorized Yamaha dealer or service center.
Disable the Bluetooth standby function (p. 33).
To protect the product, the power cannot be turned on. Unplug
the power cable from the AC wall outlet and contact the nearest
authorized Yamaha dealer or service center.
Remedy