Yamaha DSP-E390 Panduan Pemilik - Halaman 6
Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Sistem Pembicara Yamaha DSP-E390. Yamaha DSP-E390 16 halaman. Natural sound digital sound field processor
Halaman Cetak
- 1. Table of Contents
- 2. Safety Instructions
- 3. Supplied Accessories
- 4. Profile of this Unit
- 5. Speaker Setup
- 6. Integrated Amplifier or Stereo Receiver
- 7. Connections
- 8. Connecting Speakers
- 9. Identification of Controls
- 10. Speaker Balance Adjustment
- 11. Using Digital Sound Field Processor (DSP)
- 12. Notes about the Remote Control Transmitter
- 13. Troubleshooting
- 14. Specifications
• Before attempting to make any connections to or from this unit, be sure to first switch OFF the power to this unit and to any other
components to which connections are being made.
• When making connections between this unit and other components, be sure all connections are made correctly, that is to say L
(left) to L, R (right) to R, "+" to "+" and "–" to "–". Also, refer to the owner's manual for each component to be connected to this
unit.
• Choose one of the following three ways to connect this unit to your amplifier.
A Connecting to an Integrated Amplifier or Stereo Receiver with PRE OUT and
MAIN IN terminals
Front speakers
Left
PRE OUT
INPUT
-
l0dB 0 dB
FRONT
LEVEL
6
CONNECTIONS
Right
Integrated amp.
MAIN IN
TAPE
OUTPUT
LOW
PASS
fc:200Hz
CENTER
OUT
TAPE
REC
FRONT
REAR
PB
OUT
OUT
OUT
Center speaker
SPEAKERS
REAR
CENTER
REAR
8 MIN./SPEAKER
8 MIN./HAUT–PARLEUR
Right
Rear speakers
(U.S.A. model)
AC OUTLET
UNSWITCHED
I20V 60Hz
I00W MAX.
0.8A MAX.
Left
To AC outlet