Yamaha IF2115 Manual - Halaman 14
Jelajahi secara online atau unduh pdf Manual untuk Sistem Pembicara Yamaha IF2115. Yamaha IF2115 16 halaman. Installation series loudspeakers
Juga untuk Yamaha IF2115: Panduan Pemilik (6 halaman), Manual Aplikasi (45 halaman)
Halaman Cetak
General advice includes:
•
Ensure the stand is not placed where it will be a trip hazard
•
Ensure the stand is rated to take the weight of the speaker comfortably
•
Ensure the legs are splayed out sufficiently to prevent toppling
17. Loudspeaker cables
From a rigging perspective, there are a number of points to consider regarding loudspeaker
cables:
1. The "self" weight of the cable must be factored in to the total load to be flown.
Some typical cable weights are listed below for illustration:
Cable type
2 x 2.5mm² (14AWG)
2 x 4.0mm² (12 AWG)
4 x 2.5mm² (14AWG)
4 x 4.0mm² (12AWG)
8 x 2.5mm² (14AWG)
8 x 4.0mm² (12 AWG)
E.g. For a system comprising an IF3115, 10 metres of 8 x 4.0mm² cable would add an
additional 5kg of weight per speaker.
2. Cable management is necessary to ensure the cabling is held securely, and neatly in
place, and that the cable is not under any strain, which may cause damage to the
connections, undesired positioning or movement of the system.
3. Never use a loudspeaker cable for "tying off" – the purposes of preventing the system
from rotating.
18. Commonly used rigging accessories
Here are some examples of rigging accessories which may prove useful in providing solutions
to common problems encountered in rigging the Installation Series speakers in a variety of
environments:
•
Wedge sockets
•
Bullets
•
Rigging screws
•
Hanging clamp
•
STAC chain
•
RUD Adjustable chain sling
•
Bridles
Connector type
NL4
NL4
NL4
NL4
NL8
NL8
•
•
•
•
•
•
Typical
weight
per
metre (grams)
122 (0.269 lbs)
162 (0.357 lbs)
160 (0.353 lbs)
260 (0.573 lbs)
350 (0.772 lbs)
500 (1.102 lbs)
Master links / O links
Shackles
Wire rope slings
Girder clamps
Load Rated Karibiner
Custom brackets
14