Directechs Directed 403.HYUNDAI10 v2.11 Panduan Instalasi - Halaman 10
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Aksesori Mobil Directechs Directed 403.HYUNDAI10 v2.11. Directechs Directed 403.HYUNDAI10 v2.11 19 halaman. Db3 2020 hyundai santa fe (smart key)
Halaman Cetak
Module programming
Refer to "LED diagnostics and troubleshooting" for more information and for troubleshooting purposes.
Ensure vehicle is in a safe location and cannot move forward during programming. For
1
vehicles equipped with a manual transmission, make sure the gearshift lever is in the neutral
position.
Connect the 10-pin, 12-pin and 14-pin to the module. When the LED turns on solid red,
proceed with next step.
2
Note: To skip the transponder programming and use convenience features only, press the
programming button 5 times. Wait until the LED turns ON solid orange, then proceed with
next step.
Press twice on the Push-to-Start (PTS) button to turn the ignition ON. The LED will flash orange
3
quickly.
The LED turns ON solid green for 3 seconds, then turns OFF.
4
Note: If the transponder programming was skipped, the LED turns ON solid orange for 3
seconds, then turns OFF when programming is completed.
5
Press the PTS button once more to turn the ignition OFF.
You have successfully completed the module programming sequence.
10
403.HYUNDAI10 2.11 2020 Hyundai Santa Fe (Smart Key)
©2022 VOXX•DEI LLC. All rights reserved.