Directechs Directed 403.HYUNDAI10 v2.11 Panduan Instalasi - Halaman 16
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Aksesori Mobil Directechs Directed 403.HYUNDAI10 v2.11. Directechs Directed 403.HYUNDAI10 v2.11 19 halaman. Db3 2020 hyundai santa fe (smart key)
Halaman Cetak
Feature and option list
It is recommended to configure all the features and options listed below using the configuration tool found on the module flashing page at
www.directechs.com. The web offers more options; however, manual configuration of the features is possible using the information on this
page.
* Default option
Feat
Operation
Flashes / Option
.
1. No RF Output*
1
RFTD Output Type
2. RFTD Output
3. SmartStart
1. Driver priority*
2
Unlock Driver Priority
2. All
1. Disabled
3
Smart OEM Alarm
Control
2. Safelock
1. 3.0 volts*
4
Pklights Options
2. 4.1 volts
3. On CAN
1. Enable*
5
Takeover Option
2. Disable
16
403.HYUNDAI10 2.11 2020 Hyundai Santa Fe (Smart Key)
©2022 VOXX•DEI LLC. All rights reserved.
Description
Module is connected to a remote starter using a standard installation.
Module is connected to an XL202 using an RSR or RXT installation (when available).
Module is connected to SmartStart using an RSR or RXT installation (when available).
Unlocks only the driver door when the button is first pressed, and unlocks all doors when it is pressed a second
time within 5 seconds.
Unlocks all doors when the button is first pressed.
The OEM alarm will not be controlled by the interface upon remote start. No disarm or arm command will be
executed at the beginning or end of the sequence; it must be controlled by the Remote Starter.
Smart OEM Alarm Control will behave like a standard Safelock feature on a remote starter. It will unlock at the
beginning of the sequence, and relock after start and shutdown.