Directechs DIRECTED DB3 403.FORD18 Buku Petunjuk - Halaman 16

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Aksesori Mobil Directechs DIRECTED DB3 403.FORD18. Directechs DIRECTED DB3 403.FORD18 20 halaman.

Halaman Cetak

Directechs DIRECTED DB3 403.FORD18 Buku Petunjuk

Feature programming

To enter feature programming routine:

1. Turn the ignition ON, then OFF.

2. Within 5 seconds, press and hold the programming button until the LED turns ON orange (after 3 seconds).

3. Release the Programming button.

4. The LED will flash green once slowly to indicate the feature number is 1. After a short delay, the LED flashes red rapidly to

indicate the current option of feature 1 (e.g. 1 x green followed by 1 x red indicates feature 1 is set to option 1). The flashing

sequence will repeat until a new command is entered.

Changing feature options:

1. Press the lock/arm or unlock/disarm button on aftermarket transmitter to change the option of the selected feature. When

installing the DB3 in RSR using 3x OEM Lock Remote Start Activation only, there is no aftermarket transmitter on which to press

lock/unlock to change the options of the selected feature. Tapping the green or blue lock/unlock wires on the black 10-pin

harness to ground will change the option for the selected feature.

2. The LED flashes red rapidly the number of times equal to the current option number. After a short delay, the LED flashes green

slowly the number of times to indicate the current feature. The flashing sequence will repeat until a new command is entered.

Accessing another feature:

1. Press and release the programming button a number of times to advance from the current feature to the next desired feature.

2. The LED flashes green slowly the number of times equal to the feature number. After a short delay, the LED flashes red rapidly

to indicate the current option of the current feature. The flashing sequence will repeat until a new command is entered.

When the maximum number of features or options is reached, the LED will start flashing again from the first feature or option.

Exiting feature programming:

To exit feature programming, press and hold the programming button for 3 seconds or ensure there is no activity on the interface

for 30 seconds. The LED will turn ON orange for 2 seconds to confirm the end of the programming sequence.

403.FORD18 1.06 2021 Lincoln Nautilus (Smart Key)