Yamaha YVC-1000 Panduan Pengguna - Halaman 23

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Sistem Pembicara Yamaha YVC-1000. Yamaha YVC-1000 37 halaman. Microphone & speaker system
Juga untuk Yamaha YVC-1000: Panduan Pengguna (45 halaman), Panduan Pengguna (16 halaman), Manual Uji (2 halaman)

Halaman Cetak

Connecting to a video conference system using audio cables

■

Before connecting, check the following.

Prepare two audio cables (stereo RCA pin plug) for input and output.

The video conference system may provide different shapes of audio input and output terminals depending on the model. Use

audio cables with the plug shapes that match the shapes of the audio input and output terminals for you video conference

system. The product must be connected to a stereo RCA pin plug regardless of the type of the plug to be connected to the

video conference system.

■

Connection

Connect the product to the video conference system using audio cables.

Before connecting them, set the product to the standby mode.

Plug into an

outlet

Connect to the

microphone

■

Changing settings for the video conference system

Change the sound input/output settings so that the product is used as a microphone and speaker of the video conference

system.

Note

Be sure to disable the microphone and speaker on the video conference system side.

■

Adjusting the microphone sensitivity

Sound may crack or become faint on the other side depending on your environment. In this case, connect a PC or a

Mac to the product, and adjust the microphone sensitivity.

For details, refer to "Connecting to a PC using the USB cable" (pages 12 to 15) or "Connecting to a Mac using the

USB cable" (pages 16 to 18).

The microphone sensitivity setting is saved in the product, so it is not necessary to keep the PC or Mac connected after the

setting has been completed.

Audio output

terminal

Audio input

terminal

Video conference

system