Yamaha YVC-1000 Panduan Pengguna - Halaman 37

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Sistem Pembicara Yamaha YVC-1000. Yamaha YVC-1000 45 halaman. Microphone & speaker system
Juga untuk Yamaha YVC-1000: Panduan Pengguna (37 halaman), Panduan Pengguna (16 halaman), Manual Uji (2 halaman)

Halaman Cetak

Changing the setting of the audio

input terminals

Change the setting depending on the device connected

to the audio input terminals. The setting can be

configured for both the L and R terminals.

When an external microphone is selected, you can set

the output level and adjust the sensitivity and tone.

Audio input terminals

■

When the video conference system is

connected:

The factory settings are compatible with the connection

of the video conference system; therefore, you do not

need to change them. Reconfigure the settings when

connecting the video conference system in place of an

external microphone.

In the "YVC-1000 Configurator"

window, select the "AUDIO IN" tab.

Select "CONFERENCE SYSTEM"

from the "MODE" drop-down list.

Select this item for the terminal (either or both of the

L and R terminals) connected to the video

conference system.

■

When an external microphone is

connected:

In the "YVC-1000 Configurator"

window, select the "AUDIO IN" tab.

Select "PA MICROPHONE" from the

"MODE" drop-down list.

Select this item for the terminal (either or both of the

L and R terminals) connected to the external

microphone.

After completing the setting, conduct a test to

identify whether there are any problems in relation

to the audio sound of the external microphone.

Note

If "PA MICROPHONE" is selected, the latency

compensation of external speakers, which has been set by

the automatic audio tuning function, will not be enabled.

Select