Clark 6462312 Panduan Petunjuk Pengoperasian & Pemeliharaan - Halaman 14
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian & Pemeliharaan untuk Melihat Clark 6462312. Clark 6462312 17 halaman. 185mm, 1200w circular saw
Halaman Cetak
MAINTENANCE
WARNING: DISCONNECT THE CIRCULAR SAW FROM THE MAINS SUPPLY
BEFORE FITTING REPLACEMENT BLADES, CLEANING OR ADJUSTMENT.
Keep the machine clean by wiping off dust with a clean cloth.
BLADE REPLACEMENT
1. Place the 2 pin blade wrench in
the 2 holes on the blade clamping
screw. Remove the blade
clamping screw using the 6mm
hex key by turning it anti-
clockwise while holding the 2 pin
wrench in place.
2. Retract the lower blade guard
using the retracting lever and
replace the blade.
• Make sure you pay attention to
the blade direction markings
on the blade.
• Spare blades are available
from your local CLARKE dealer.
3. Replace the blade clamping
screw by hand until it is holding
the blade in position.
4. Place the 2 pin blade wrench in the 2 holes on the blade clamping screw.
5. Tighten the blade clamping screw using the hex key by turning it clockwise
while holding the 2 pin blade wrench in place.
Replacement blades can be purchased from your local CLARKE dealer.
• CLARKE 185mm TCT Circular Saw Blade 24 tooth, Part No. 6490045
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
14