aldes VS6 MAX Petunjuk Manual - Halaman 2

Jelajahi secara online atau unduh pdf Petunjuk Manual untuk Kipas angin aldes VS6 MAX. aldes VS6 MAX 6 halaman. Vs series in-line ventilators

Halaman Cetak

The fan uses a backward-inclined impeller

design that minimizes dust from collecting

on the blades. Each fan is statically and

dynamically balanced at the factory to

eliminate vibration and ensure quiet

operation. The entire motor and fan assembly

is mounted on a drop-down hinged access

panel for simple service and inspection,

and it can be removed from the fan without

disassembling the duct connections.

FAN CONTROLS

The fan can be operated manually or

automatically by a programmable timer,

dehumidistat, or other appropriate electronic

switch device. The fan may also be operated

in conjunction with a variable speed control.

LOCATING AND INSTALLING THE FAN

The compact dimensions and versatile

mounting options permit installation above

drop ceilings, between ceiling joists, or within

a small soffit location. The fan can be installed

horizontally or vertically.

Use ductwork of a diameter that is the same

as or greater than the diameter of the duct

connectors on the fan.

DUCTING THE FAN

The ducting from this fan to the outside of

the building has a strong effect on the air

flow, noise and energy use of the fan. Use the

shortest, straightest duct routing possible for

best performance, and avoid installing the

fan with smaller ducts than recommended.

Insulation around the ducts can reduce

energy loss and inhibit mold growth. Fans

installed with existing ducts may not achieve

their rated airflow.

ACCESSORIES

Accessories are available to accommodate

one or two bathrooms. Accessories are

included only when ordered as a Single-Port

Bath Fan Kit (SBFK).

PERFORMANCE

Fan airflow and energy performance are

tested in accordance with HVI procedures.

Reference RDF Installation

Supplement for additional

instructions and warranty

information.

American ALDES Ventilation Corporation, is strictly prohibited. The information contained within this document is subject to change without prior written notice.

American ALDES Ventilation Corporation • 4521 19th Street Court East, Suite 104 • Bradenton, FL 34203 – USA

941.351.3441 • 800.255.7749 • 941.351.3442 (fax) • [email protected] • www.aldes.us

BACKDRAFT DAMPERS*

†

EXHAUST GRILLES*

MOUNTING BRACKET LOCATIONS

ELECTRICAL AND AIRFLOW PERFORMANCE*

Watts

Model

at 0.2"

0.2"

VS4

21.3

101

VS4 MAX

38.1

138

122

VS6

40.1

220

178

VS6 MAX

63.3

287

261

*Certified airflow rating at 0.2" w.g. is derated from actual test results per HVI Certification procedure 920.

The HVI Certified Rate for VS4 = 80 CFM, VS4 MAX = 120 CFM, VS6 = 170 CFM, VS6 MAX = 260 CFM.

VS4: 115 V, 60 Hz, 21 W, 0.19 A, 2500 RPM

VS4 MAX: 115 V, 60 Hz, 34 W, 0.29 A, 3135 RPM

VS6: 115 V, 60 Hz, 41 W, 0.34 A, 2200 RPM

VS6 MAX: 115 V, 60 Hz, 59 W, 0.53 A, 2960 RPM

Above ratings are intended for sizing electrical wiring only.

NOTE: Performance shown does not reflect use of optional balancing devices.

VS SCHEMATIC

WALL HOOD

OR ROOF CAP*

†

CFM vs. Static Pressure

0.4"

0.6"

0.8"

1.0"

106

141

105

234

205

178 151

ELECTRICAL DATA

Actual consumption will be lower.

VS Series

FAN HOUSING

(Insulation may be installed

†

over the fan housing)

Duct joints, and ceiling

and wall penetrations

should be sealed

†

DUCTWORK*

*Sold separately

†

Refer to IOM text for details

ENERGY

STAR

1.2"

1.4"

1.6"

Certified

120

VS Series_IOM_0616

†