ECOPOSTURAL C3500 Petunjuk Manual - Halaman 7

Jelajahi secara online atau unduh pdf Petunjuk Manual untuk Peralatan Medis ECOPOSTURAL C3500. ECOPOSTURAL C3500 17 halaman. Electric table

English

ELECTRIC TABLE

INSTRUCTIONS

Ecopostural thanks you for buying our products. The item you have just purchased has been

manufactured according to high quality and security standard. Follow the below-mentioned instructions

carefully in order to be able to make use of it for a long time. Click on to the TECHNICAL INFORMATION

section in our website www.ecopostural.com

* Our company will decline any responsibility for any damage occurred if ignoring these

instructions.

1) GENERAL INSTRUCTIONS

- Please read carefully the operating and safety instructions before using our products. These instructions

must be adhered to. Keep the instructions booklet for further check-ups.

- Familiarize yourself with the precise use of the item.

- If the table is handled by unqualified people in an inappropriate way or not according to the intended

purpose, the use of the examination table may be dangerous. Be careful when handling the table as there

is a risk of being trapped by the mobile parts and because of sudden movements.

- Regularly check the table entirely to find any sign of malfunction or damage. Periodically check mains

cable and plug. We recommend to handle them with the utmost care and to avoid the bending of the

cables.

- Worn or damaged pieces must be solely replaced by original pieces by the manufacturer depending on

the table model.

- All components parts or accessories should be fitted or fixed in according to the special manufacturer's

instructions. Any spare / replacement component part different to the manufacturer's could be dangerous

for the people involved in the table handling.

* Notice: The use of non original pieces or the alteration of the item will incur in a loss of validity of

the manufacturer's guarantee, instructions and Declaration of Conformity.

2) OPERATING INSTRUCTIONS

a) Installing

The table must lean on a solid and level ground.

The table is supplied with a leveller placed in one of the legs. To level the table, simply wind or unwind it.

Notice: in certain floor surfaces the table legs might leave marks after a prolonged contact. Check the

technical specifications of the floor manufacturer to avoid any trouble.

b) Load capacity

This item has been tested to support a MAXIMUM STATIC WEIGHT of 135 Kg evenly distributed all over.

* In case this weight is exceeded a safety device will automatically start-up. As a result the table might

gradually move downwards regardless of the motor activation. Reduce the load in order to restore the

proper operation of the table.

Absolutely avoid leaning on the very edge for support as it may tilt over.

If pressure on a reduced area exceeds the allowed weight, the table upholstery could split up. Keep the

patients from getting on by their knees.

To get on the table the patient must seat at the middle of the table, raise his legs and lean on his side.

Then, he can lie down. Weight must necessarily be distributed evenly and not concentrated on either side