aldes InspirAIR Top 300 Classic Manual Petunjuk Perakitan - Halaman 8
Jelajahi secara online atau unduh pdf Manual Petunjuk Perakitan untuk Sistem Pemanas aldes InspirAIR Top 300 Classic. aldes InspirAIR Top 300 Classic 14 halaman.
Halaman Cetak5.2. Structure of InspirAIR
The INFORMATION menu can be accessed without password. It display the unit's key settings without being able to alter them. The installer can thus find out
about the unit's characteristics and operation. The user can use it to communicate elements remotely to the installer if the unit does not seem to be working
properly and for initial remote troubleshooting.
Settings
Filter alert
INFORMATION
i
Error
Product ID
Connectivity
The USER menu is specific for the user and can be accessed without password. Here he can adjust his ventilation every day and launch simple actions.
Languages
Light signal
(Premium unit
USER
only)
Filters
Programming
Sensors
Open fire
The INSTALLER menu is specific for a competent installer and can be accessed with the password: 0405. The installer can access all the settings, accessories and
operating and maintenance data for the machine. The installer will be able to configure the product via the InspirAIR
control or 11023479 - InspirAIR
®
remote control) as well as via the configuration software Aldes Configurator available on the https://services.aldes.com/logiciels site.
®
remote control menus
Display the unit's key settings without being able to alter them:
- control type
- time delay
- current speed
- comfort temperature
Display without being able to alter them:
- filter type
- filter status (timer elapsed or not)
- number of days remaining
Display the error code(s) activated by the unit
Display without being able to alter them:
- item no. of the unit
- serial no.
- unit and remote control software no.
Display which accessory is connected to the unit and confirm its operating state:
- remote controls
- 0-10 V sensors
- Aldes Connect modem
- ModBus connectivity
Choose the use language
Choose the unit's beat on the Premium unit:
- change of colour according to the air quality
- beat in time with the fan speed
- not lit
Choose the period and reset the filter timer to zero
Launch rapid programming of the ventilation in the dwelling
Activate or deactivate, temporarily or permanently, taking the indoor air quality into account to run the ventilation automati-
cally
Activate for two hours positive pressure ventilation operation to encourage a fire to develop in an open fireplace
- filter type
- heating coils
®
Installer
Assistant reboot
22
remote control (11023480 - InspirAIR
Settings
Language
Country of inst.
Date and hour
Regulation mode
Config. level
Dwelling type
Imbalance
Radon mode
Open fireplace
Timer filters
Units
Certifications
Factory reset
Quick fine tune
Connectivity
Sensors
Heating coils
Fire dampers
Dry cont-config
Maintenance
Actual values
démo signal
®
CO
remote
2