Clark Synthesis TST329 Panduan Instalasi - Halaman 14
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Penguat Clark Synthesis TST329. Clark Synthesis TST329 20 halaman. Platinum, gold, silver and all weather transducers
Juga untuk Clark Synthesis TST329: Panduan Tambahan (4 halaman), Panduan Instalasi (8 halaman), Lembar data (1 halaman), Panduan Pembeli (2 halaman), Spesifikasi (1 halaman), Panduan Instalasi (20 halaman)
Halaman Cetak
Wiring & Connections
HOME THEATER
There are several different ways to hook up your system in terms of which source material (signal)
is delivered to the amplifier(s) and Transducer(s). Since our inception, we have discovered that
approximately half of our customers prefer using the LFE/SUB signal with their Transducers. The other
half prefer using the Right Front (RF) and Left Front (LF) signals. Additionally, there are a few people
who like to use multiple signals concurrently. In the following instructions, we provide you with general
diagrams for each of these hookup methods.
LFE/SUB Hookup
The LFE, SUB, or Subwoofer output is the signal that you send to the subwoofer.
If your receiver has only one LFE/SUB/Subwoofer output port, connect a "Y" adapter to that output.
This will allow you to split the signal between the Transducer and the subwoofer. To do this properly,
connect your subwoofer to one side of the "Y" adapter. Connect the amplifier to the other side of the
"Y" adapter. To reduce the amount of noise produced when using this signal, use another "Y" adapter
cable when connecting to the amplifier. This will allow you to connect the signal into both the Left and
Right input connectors on the amplifier.
Amplifier
(100 - 150
Watts into
4 ohms)
Output
Transducer
14
Tactile Sound Transducers
Surround-Sound Receiver
L
R
OUT
IN
–
+
Y Adapter
LFE/SUB
Y Adapter
To Input of
Powered
Subwoofer
www.clarksynthesis.com
Subwoofer