Clark Synthesis TST429 Panduan Instalasi - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Penguat Clark Synthesis TST429. Clark Synthesis TST429 20 halaman. Platinum, gold, silver and all weather transducers
Juga untuk Clark Synthesis TST429: Panduan Tambahan (4 halaman), Panduan Instalasi (8 halaman), Panduan Instalasi (1 halaman), Panduan Pembeli (2 halaman), Spesifikasi (1 halaman), Panduan Instalasi (20 halaman)

Halaman Cetak

Clark Synthesis TST429 Panduan Instalasi

1. Supplied Parts

Installation: Chairs & Couches

As a general rule, most chairs and couches have an

underlying wooden frame. The Transducer can be

mounted directly to a frame member or to a hardwood

bridge that is rigidly secured to chair or couch's bottom

frame. The bridge should be at least 3/4" thick and cut

to span the two frame members or connect two sides

of a box frame. The more centrally located the frame

member or bridge is on the overall structure, the better

the distribution of tactile sound.

For best results, the Transducer should be parallel to the

ground (horizontal) so that the motion is up and down as

opposed to sideways. The Transducer can be mounted

to either the top or bottom of the bridge. When attaching

the Transducer to the top of the bridge, be sure that the

Transducer and the wiring does not interfere with any

recliner mechanism. When attaching the Transducer

to the bottom of the bridge, be sure that the Transducer

does not touch the floor.

A chair or couch with armrests is preferred since a

significant amount of tactile sensation is felt in the hands

and arms.

Tactile Sound Transducers

Hardwood Bridge (min. 3/4" thick)

Transducer mounted

under the bridge

Transducer mounted

over the bridge