Caliber 13579 Manual Petunjuk Perakitan - Halaman 8
Jelajahi secara online atau unduh pdf Manual Petunjuk Perakitan untuk Aksesori Mobil Caliber 13579. Caliber 13579 10 halaman. Sled wheels
Juga untuk Caliber 13579: Manual Petunjuk Perakitan (8 halaman)
Halaman Cetak6. Grab one Sled Wheel assembly by the handle, hold it vertically, and slide the fingers under the ski until the wheel
axle is in line with the spindle bolt. You may need to lift the ski loop to create space under the ski. Rotate the
assembly down to raise the ski and check the length of the telescoping handle. Adjust as necessary to keep the
Sled Wheels axle and the spindle axle in line.
7. When the handle and saddle(Upgraded in
Black Nylon) are in place, and the Sled
Wheels assembly is installed onto the ski,
the latch should swing open and close
around the ski loop. Slide the latch up
until it just touches the ski loop and
tighten the screw (approximately 4 ft-
lbs). Do not over-tighten.
8. Fine adjustment: If the ski tips forward or backward, Sled Wheels need slight adjustments. If the ski tips
forward, the Sled Wheels axle is behind the ski spindle axle. Shorten the telescoping handle until the two axles
line up. Conversely, if the ski tips backwards, lengthen the telescoping handle. Also, check your ski bushings;
they should be tight and not worn. Good bushings will help your ride and help keep your ski horizontal when
riding with Sled Wheels.
9. Adjust the second assembly to the same locations as the first.
- Page 8 -
Assembled on May 19, 2020
CI05067, rev E