aerauliqa THS400 Panduan Khusus - Halaman 11
Jelajahi secara online atau unduh pdf Panduan Khusus untuk Kipas angin aerauliqa THS400. aerauliqa THS400 20 halaman.
EN
THS RANGE
Ceiling High Volume Low Speed Fan (HVLS)
INDEX
GENERAL INFORMATION
1.
2. PRECUTIONS
3. TYPE
4. MAIN FEATURES
5. DATA
6. DIMENSIONS AND CLEARANCES
7. COMPONENTS
8. INSTALLATION
9. WIRING DIAGRAM
9.1 CTRL-A (accessory on request)
9.2 CTRL-HS (accessory on request)
9.3 CTRL-XWS (accessory on request)
9.4 CTRL-XTHI (accessory on request)
9.5 CONTROL WITH EXTERNAL POTENTIOMETER (not supplied)
10. CLEANING
11. TROUBLESHOOTING
11.1 Connection parameters
11.2 Modbus registers - Input register
11.3 Alarm codes / led status / troubleshooting
12. DECLARATION OF CONFORMITY AND INCORPORATION
1. GENERAL INFORMATION
Carefully read the instructions contained in this manual.
This Specific Manual MUST be read in conjunction with the "Installation, Operation and Maintance General Manual".
Note: store the manual for future reference. We reserve the right to improve and make changes to the manual, products and
accessories without any obligation to update previous productions and manuals.
The installation and service of the unit and complete ventilation system must be performed by an authorized installer and in
accordance with local rules and regulationid.
2. PRECAUTIONS
In addition to the precautions indicated in the "Installation, Operation and Maintenance General Manual" special attention should
be paid to the following warning notes:
-The fan must be installed at a height of not less than 2.7m from the floor below. Installation at a lower height is
considered "improper use". In case of "improper use" the manufacturer declines all responsibility for any damage
that may be caused to persons or property, and any warranty will be considered invalid.
RECOMMENDED BOLT TORQUE FOR COARSE THREADED METRIC STEEL BOLTS TE-TCEI GRADE 8.
Dimensions
M6
Nm
9,5
Table 1 Use the values shown in the table to tighten all the screws.
- fixing: check/inspect and eventually retighten all the fixing annually.
- windy conditions: fans should not operate in case of strong wind (6m/s) and should not be installed in places where it is
frequently windy.
- weight: it is recommended that the building structure is capable to bear approx. twice the weight of the fan as well as a
torque of at least 350Nm. A professional structural engineer should perform an evaluation before installing the fan.
- key safety features: make sure that all the supplied key safety features are used to install the fan to provide a comprehensive
protection of people, animals, equipments and property.
The installer and the building owner are responsible to ensure the safety of the fan mounting system and that the fan installation
is correct, in compliance with any national and local regulations.
3. TYPE
Ceiling fans with EC brushless motor designed for industrial, civil and zootechnical applications, where high performance with
low rotation speed are required.
M8
M10
M12
23
46
79
M14
M16
127
198
11
Translated from Original Instructions
11
11
11
12
12
12
12
13
15
15
16
16
17
17
18
18
18
18
18
19