Directed AS-3472TW Panduan Pengguna - Halaman 17

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Starter Jarak Jauh Directed AS-3472TW. Directed AS-3472TW 20 halaman.

Halaman Cetak

AUX 2

2-way remote: If configured at installation, by default, press the Function button to select level 01

("L-01"), then press the

more details.

1-way remote: If configured at installation, press twice quickly on the AUX button, then once on the

button while the LED is slowly flashing.

Horn Chirp Timing

The pulse duration can be configured by your installer (from 5 ms to 200 ms).

Multi-car Operation

This option allows the owner of two vehicles, both equipped with the same remote starter model, to

control both systems with a single remote control.

Note: Your remote control must be configured for second car operation by the installer.

To control the second vehicle:

Press

OEM-Style Alarm

The OEM-style alarm (if configured by your installer) monitors the doors, hood and ignition switch

of your vehicle. It will sound the horn if a door or the hood is opened, or if the key is turned in the

ignition.

To arm the OEM-style alarm, press the

•

- The OEM-style alarm will ONLY arm if the

- The LED on the antenna will flash slowly to indicate that the OEM-style alarm is now

armed.

To disarm the OEM-style alarm, press the

•

User Guide

button to activate AUX 2. Refer to the multi-level features table for

simultaneously: ................................................. LOCK

simultaneously: ................................................. UNLOCK

simultaneously: .................................................. START

simultaneously: .................................................. STOP

:............................................................ TRUNK



:............................................................ LOCK



:............................................................ UNLOCK



: ............................................................. START



: ............................................................. STOP



:............................................................ TRUNK



To stop the horn from sounding if the OEM-style alarm is triggered, press the

button, or put the system in and out of Valet Mode (page-12)

button on the transmitter.

button on the transmitter is pressed.

button on the transmitter.

P.17