Clarke 3400771 Petunjuk Pengguna - Halaman 4

Jelajahi secara online atau unduh pdf Petunjuk Pengguna untuk Alat Listrik Clarke 3400771. Clarke 3400771 17 halaman. Plastic stapler/welder kit

GENERAL SAFETY WARNINGS

WARNING: READ ALL SAFETY WARNINGS AND ALL INSTRUCTIONS.

FAILURE TO FOLLOW THE WARNINGS AND INSTRUCTIONS MAY RESULT IN

ELECTRIC SHOCK, FIRE AND/OR INJURY.

1. Keep work area clean and well lit. Cluttered or dark areas invite accidents.

2. Keep children and bystanders away while operating a power tool.

Distractions can cause you to lose control.

3. To prevent fire, DO NOT use this device in an flammable and explosive

environment.

4. Due to the gasses given off by the melting of the plastic, the device should

be used in a well ventilated workplace.

5. If you need to use the device in the car paint booth always extract the

contaminated air in the paint booth in advance.

1. Power tool plugs must match the outlet. NEVER modify the plug in any way.

DO NOT use any adapter plugs with earthed (grounded) power tools.

Unmodified plugs and matching outlets will reduce risk of electric shock.

2. Avoid body contact with earthed or grounded surfaces, such as pipes,

radiators, ranges and refrigerators. There is an increased risk of electric

shock if your body is earthed or grounded.

3. DO NOT expose power tools to rain or wet conditions. Water entering a

power tool will increase the risk of electric shock.

4. DO NOT abuse the power cable. NEVER use the cable for carrying, pulling

or unplugging the power tool. Keep the cable away from heat, oil, sharp

edges or moving parts. Damaged or entangled cables increase the risk of

electric shock.

5. When operating a power tool outdoors, use an extension cable suitable for

outdoor use. Use of a cable suitable for outdoor use reduces the risk of

electric shock.

6. If operating a power tool in a damp location is unavoidable, use a residual

current device (RCD) protected supply. Use of an RCD reduces the risk of

electric shock.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]