Clarke 4500615 Petunjuk Pengoperasian & Pemeliharaan - Halaman 3

Jelajahi secara online atau unduh pdf Petunjuk Pengoperasian & Pemeliharaan untuk Alat Listrik Clarke 4500615. Clarke 4500615 17 halaman.

SAFETY PRECAUTIONS

1. Keep the work area clean and tidy and free from trip hazards.

2. Do not wear loose clothing or jewellery. Tie long hair out of the way.

3. If wearing gloves, make sure that there is no frayed material that could

catch in rotating parts.

4. Keep children and visitors away - do not let children handle the wrench.

5. Do not use in damp or wet conditions. Keep the work area well lit. Do not

use where a risk of fire or explosion is present.

6. Although the wrench may be used outdoors, DO NOT leave it exposed to

the elements. Avoid direct sunlight, direct heat, rain/moisture etc.

7. ALWAYS keep body and clothing dry. Never work in damp area without

adequate insulation against electric shock.

8. ALWAYS store this product in a dry, secure place out of reach of children or

untrained users.

9. ALWAYS keep equipment dry, especially the battery & battery charger.

10. NEVER over-reach. Keep proper footing and balance at all times and

adopt a comfortable, well balanced working position for ongoing work.

1. This product vibrates during use. Vibration may be harmful to your hands or

arms. Stop using the wrench if discomfort, a tingling feeling or pain occurs

and seek medical advice before resuming use.

2. ALWAYS use ear defenders for prolonged work. Exposure to high noise

levels can cause permanent hearing problems.

3. Always wear impact resistant eye protection in case of flying projectiles.

4. ALWAYS stay alert and use common sense - do not use this product when

you are tired or under the influence of alcohol or medication.

5. ALWAYS ensure the workpiece is firmly secured leaving both hands free to

control the wrench. Hold the impact wrench correctly and be ready to

control sudden movements.

6. ALWAYS check for any damage or condition that could affect the

wrench's operation. Any damaged part should be properly repaired.

7. NEVER force or misuse the wrench. It will do a better and safer job at the

rate for which it was designed.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]