Clarke 6462070 Petunjuk Pengguna - Halaman 8
Jelajahi secara online atau unduh pdf Petunjuk Pengguna untuk Alat Listrik Clarke 6462070. Clarke 6462070 17 halaman. Biscuit jointer
Halaman Cetak
ADJUSTING THE CUTTING HEIGHT
NOTE: Always unplug the biscuit jointer before making any adjustments.
•
The height can be set by unlocking both of the bevel adjustment levers
and sliding the fence to the desired
level with the aid of the scale.
(refer to fig.1).
•
Normally the height set corresponds
to half the material's thickness
(biscuit grooves are cut in the
centre of the piece). Note: a
thicker piece may have more than
one biscuit across it's thickness i.e.
one at 1/3rd and one at 2/3rds.
•
If the bevel adjustment levers are in
the way when working, pull the lever
out and turn to a new position.
ADJUSTING THE CUTTING ANGLE
•
The cutting angle can be set by
unlocking both bevel adjustment
levers and moving the fence to
the required angle. (refer to fig.1).
MOUNTING THE DUST EXTRACTION
•
For dust extraction connect either a
vacuum to the dust extraction
adaptor or the included dust bag.
•
Regularly empty the dust bag to
maintain dust extraction
performance.
SETUP CONTINUED
- 7 -