Clarke 6480237 Panduan Petunjuk Pengoperasian & Pemeliharaan - Halaman 10
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian & Pemeliharaan untuk Alat Listrik Clarke 6480237. Clarke 6480237 17 halaman. Metalworker multi purpose sharpener
Halaman Cetak
SHARPENING SCISSORS
1. Slide the knife and scissor attachment onto the power unit.
2. Switch on the power unit.
3. Open the scissors fully and slide
the first blade through the front
guide slot with the other blade to
the right hand side.
4. Draw the blade across the
grinding wheel from pivot to tip
using only a light pressure.
5. Remove and turn the scissor over
to sharpen the second blade.
6. Repeat if necessary until clean,
sharp edges are achieved.
7. Switch the power unit off and ensure the grinding wheel has stopped
before removing the sharpener attachment from the power unit.
CHISEL AND PLANE SHARPENER
Using this module you can sharpen chisels and plane blades up to 2" (50mm)
wide at a grinding angle from 20-40
SHARPENING BLADES
1. Slide the chisel and plane blade
attachment onto the power unit.
2. Place the blade against the back
lip of the support plate. The
magnet helps hold the blade in
position.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
o
.
10