ALDI OL 250-L-17 Panduan Pengguna - Halaman 14

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Laminator ALDI OL 250-L-17. ALDI OL 250-L-17 19 halaman. A4 laminator

The heating rollers will automatically pull the laminating pouch in and move it

to the laminating pouch output slot

force to pull out the laminating pouch.

4. Remove the laminating pouch and let it cool off briefly on a flat surface.

− If necessary, you can cut off excessive material after it has cooled

− Repeat the process if the laminating pouch has not adequately

5. Move the ON / OFF switch to "OFF" ( ) to switch the laminator off.

Removing a jammed laminating pouch

The laminator is equipped with an antiblocking system. If the laminating pouch was

not inserted straight or it becomes jammed in the laminator, proceed as follows:

1. Move the ABS switch

it down (see Fig. B).

2. Pull the laminating pouch

It is recommended you pull the laminating pouch out in the direction

of its larger end.

You can place the document in a new laminating pouch and laminate it again.

Cleaning

WARNING!

Burn hazard!

The laminator will become hot during operation. You may burn

yourself.

− Always let the laminator cool off completely before you clean it.

NOTICE!

Risk of short circuit!

Water or other liquids that have penetrated the housing may cause

a short circuit.

− Never submerge the laminator in water or other liquids.

off.

adhered to the document.

towards the laminating pouch infeed slot

out of the laminator.

on the front of the laminator. Do not use

and hold