Clarke 7640130 Panduan Petunjuk Pengoperasian & Pemeliharaan - Halaman 8
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian & Pemeliharaan untuk Alat Listrik Clarke 7640130. Clarke 7640130 20 halaman. Pressurised sandblaster
Halaman Cetak
OPERATION
WARNING: ALWAYS WEAR YOUR HOOD, DUST MASK AND HEAVY DUTY
CANVAS GLOVES WHEN OPERATING THE SANDBLASTER.
WARNING: BEFORE OPERATING YOUR SANDBLASTER, INSPECT EACH
CONNECTION, DOUBLE CHECKING TO MAKE SURE THAT ALL ARE TIGHT
AND PROPERLY SEALED.
WARNING: THIS SANDBLASTER IS NOT INTENDED FOR USE WITH SILICA BASED
ABRASIVES. WHICH HAVE BEEN LINKED TO SEVERE RESPIRATORY DISEASE.
ALWAYS USE SILICA SUBSTITUTES (SUCH AS CLARKE GLASS BEAD ABRASIVE.
SAFETY AND HEALTH CONSIDERATIONS
• Before opening tank make sure that it is not pressurized. Ensure the
gauge reads "0". If it does not, release pressure from the tank (See
page 11).
• Disconnect the compressor before opening the tank. Protect
yourself and those around you from "over-spray". Remember that
your portable abrasive blaster is shooting a powerful spray of
abrasive material. Do not point it at yourself or anyone around you.
• Wear protective clothing including hood (30), and heavy gloves
when using this abrasive blaster.
• Wear a filter or mask over your mouth when using this tool. You will
create a cloud of abrasive material and debris which is dangerous
to inhale.
• Protect anything around you that may be damaged from the
abrasive spray or particles. Nothing subject to contamination
damage or with a fine surface should be near your abrasive
blaster.
ABRASIVE SELECTION
The kind of abrasive you choose will greatly influence the amount of time
needed to clean a given surface area.
8