Directed Directechs DB3 Panduan Instalasi - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Starter Jarak Jauh Directed Directechs DB3. Directed Directechs DB3 20 halaman. Smart key for 2013 toyota highlander
Juga untuk Directed Directechs DB3: Panduan Instalasi (20 halaman), Panduan Instalasi (19 halaman), Manual (6 halaman), Panduan Instalasi (18 halaman), Panduan Instalasi (18 halaman), Panduan Instalasi (19 halaman), Panduan Instalasi (20 halaman), Panduan Instalasi (19 halaman), Panduan Instalasi (20 halaman), Panduan Instalasi (10 halaman), Panduan Instalasi (19 halaman), Panduan Instalasi (19 halaman), Panduan Instalasi (20 halaman), Panduan Instalasi (20 halaman), Panduan Instalasi (20 halaman), Panduan Instalasi (10 halaman), Panduan Instalasi (20 halaman), Panduan Instalasi (20 halaman), Panduan Instalasi (19 halaman), Panduan Instalasi (20 halaman), Panduan Instalasi (20 halaman), Panduan Instalasi (18 halaman), Panduan Instalasi (20 halaman), Panduan Instalasi (19 halaman), Panduan Instalasi (19 halaman), Panduan Instalasi (18 halaman), Panduan Instalasi (19 halaman), Panduan Instalasi (20 halaman), Panduan Instalasi (18 halaman), Panduan Instalasi (19 halaman), Panduan Instalasi (20 halaman), Panduan Instalasi (20 halaman), Panduan Instalasi (18 halaman), Panduan Instalasi (20 halaman), Panduan Instalasi (19 halaman), Panduan Instalasi (20 halaman), Panduan Instalasi (18 halaman), Panduan Instalasi (19 halaman), Panduan Instalasi (20 halaman), Panduan Instalasi (17 halaman), Panduan Instalasi (20 halaman), Panduan Instalasi (18 halaman)

Directed Directechs DB3 Panduan Instalasi

Immobilizer interface with OEM immob. receiver

For vehicles with Keyless Entry, you must remove battery from OEM key (the OEM remote may differ from the models shown in
the illustrations).
Method 1: Immobilizer interface with OEM immobilizer receiver (PTS)
Note: OEM immobilizer receiver is located on
the underside of the steering column, where
the ignition switch would normally be.
Notes:
- Your OEM remote may differ from the model shown in the illustrations.
- Remove Battery from OEM FOB prior to performing the Key Wrap.
- Make 4-6 loops and place them around the front of the plastic body of the vehicle's coded key as shown above.
- Test and secure mounted loops before reassembling the vehicle.
Method 2: Immobilizer interface with 556U (PTS)
556U or 556UW is sold SEPARATELY.
OEM Valet Key
IMPORTANT!
Not all OEM remotes can be inserted in 556U because of their size.
Make sure the key will fit, otherwise it is recommended to use a different method.
6
403.VW18 2.05 2024 Volkswagen Jetta GLI (Smart Key)
©2023 Directed. All rights reserved.
OEM
Immobilizer
Receiver
4-6 loops
OEM
Immobilizer
Receiver
PIN 6 Green
PIN 5 Violet
PIN 4 Black
PIN 3 Violet
PIN 2 Blue
PIN 1 Red
Common Relay 2: Yellow/Red: 11
4-6 loops
Common Relay 2: Yellow/Red: 11
(+) 12V
NO Relay 2: Brown/Red: 12
Remove battery from
OEM Remote Control
Note: OEM immobilizer receiver is located on
the underside of the steering column, where
the ignition switch would normally be.
NO Relay 2: Brown/Red: 12