Clarke BJ300 Petunjuk Pengguna - Halaman 3
Jelajahi secara online atau unduh pdf Petunjuk Pengguna untuk Alat Listrik Clarke BJ300. Clarke BJ300 17 halaman. Biscuit jointer
Halaman Cetak
GENERAL SAFETY PRECAUTIONS
PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE OPERATING
As with all machinery, there are certain hazards involved with their
operation and use. Exercising respect and caution will considerably lessen
the risk of personal injury. However, if normal safety precautions are
overlooked or ignored, personal injury to the operator or damage to
property, may result.
•
ALWAYS Learn the machines applications, limitations and specific potential
hazards peculiar to it. Read and become familiar with the entire operating manual.
•
ALWAYS use a face or dust mask.
•
ALWAYS check for damage before use, any damaged part should be checked
to ensure that it will operate properly and perform it's intended function. Check
for alignment of moving parts, breakage of parts, mountings, and any other
condition which may effect the machines operation. Any damage should
be properly repaired or the part replaced . If in any doubt DO NOT use the
machine. Consult your local dealer.
•
ALWAYS disconnect the tool/machine from the power supply before servicing
and when changing accessories.
•
ALWAYS wear safety goggles, manufactured to the latest European safety
standards. Everyday glasses do not have impact resistant lenses, they are NOT
safety glasses.
•
ALWAYS keep work area clean. Cluttered areas and benches invite accidents.
•
ALWAYS ensure that adequate lighting is available. A minimum intensity of 300
lux should be provided. Ensure the lighting is placed so you will not be working
in your own shadow.
•
ALWAYS keep children away. All visitors should be kept at a safe distance
from the work area, especially whilst operating the machine.
•
ALWAYS maintain machine in top condition. Keep tools/machines clean for
best performance. Follow maintenance instructions.
•
ALWAYS ensure the ON switch if OFF before plugging into the mains. Avoid
accidental starting.
•
ALWAYS handle with extreme care, do not carry the tool/machine by it's
electrical cable, or yank the cable to disconnect it from the power supply.
•
ALWAYS concentrate on the job at hand, no matter how trivial it may seem. Be
aware that accidents are caused by carelessness due to familiarity.
•
ALWAYS wear proper apparel. Loose clothing or jewellery may get caught in
moving parts. Wear protective hair covering to contain long hair.
•
ALWAYS remove plug from the electrical outlet when adjusting, changing parts,
or when working on the machine.
WARNING:
- 2 -