Clarke CBS16 Panduan Petunjuk Pengoperasian & Pemeliharaan - Halaman 9
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian & Pemeliharaan untuk Alat Listrik Clarke CBS16. Clarke CBS16 13 halaman. Electric drill bit sharpener
Halaman Cetak
CLEANING
1. Keep the surface of your sharpener free of grit, dirt, and grease. Use soapy
water or non-toxic solvents. Do not use petroleum based solvents.
2. Keep the air vents free of foreign matter at all times.
3. If the motor does not operate, it needs to be serviced or replaced by a
qualified technician.
TROUBLESHOOTING
If the motor turns on, but the wheel does not spin, make sure the adjustment
cylinder's inner flats line up with the outer flats of the spindle as described in
"Changing The Wheel" on page 8.
SPECIFICATION
Model Number
Voltage
Operating Temperature
Drill Bit Sizes And Type
Duty Cycle
No Load Speed
Sound Pressure Level (L
Guaranteed Sound Power (L
Dimensions (L x W x H)
Weight
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
CSB16
230 V @ 50Hz
o
-15
3.0 mm to 10 mm HSS
S3 20% (2 minutes on, 8 minutes off)
1600 rpm
dB)
61 dB(A)
pA
dB) 74 dB(A)
wA
140 x 130 x 240 mm
2.2 Kg
9
o
C - +40
C