ACOPOWER HY-COMBO-X30A+X200A Panduan Memulai Cepat - Halaman 5
Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Pembeku ACOPOWER HY-COMBO-X30A+X200A. ACOPOWER HY-COMBO-X30A+X200A 8 halaman. Rechargeable solar fridge freezer
Halaman Cetak
Built-in Safety Control:
When your vehicle engine is running, there is no chance of LiONCooler draining your
LiONCooler connected to the 12/24v socket, the cooler will continue to 'draw' power
from your vehicle battery. In order to protect your vehicle battery, LiONCooler has
safety settings for this situation.
With the LiONCooler switch ON, press and hold the SETTINGS (gear wheel) button for
about 5 seconds to change the battery protection mode. There are three options:
H(igh), M(edium), L(ow).
For example:
When the unit is connected to the car, we suggest setting the car battery protection to H or M level. L
is suggested when the unit is powered in a wall outlet or in 'cordless mode' running on LiONCooler's
own battery. 'L' means you don't need to protect anything because you're not connected to a vehicle
battery power source.
TIP:
If you have a good memory and can get into a routine of doing the following, simply getting into the
is another way of ensuring you don't end up with a flat car battery
steps above but we all love a workaround suggestion! Either way - make sure to protect your vehicle
battery!
STEP 5. Cooling Power Settings MAX or ECO mode:
When you want a faster 'booster' chill or freeze, setting LiONCooler to MAX mode is the ideal setting.
However, keep in mind that using MAX also consumes more power which can be more noticeable in
once your desired temperature is reached and being maintained, that you set the cooler to ECO
mode. Pre-chilling drinks/produce ahead of time wherever possible will also enable you to switch to
ECO mode sooner; just think of it like placing warm food/drinks in your kitchen fridge which will take
longer to cool down and make your fridge "work harder".
With the LionCooler switched ON and running, press the SETTINGS (gear
With the LionCooler switched ON and running, press the SETTINGS (gear
wheel) button to select control mode, and then you can switch between
wheel) button to select control mode, and then you can switch between
MAX(Quick cooling) and ECO (Energy-saving) mode. Only press the button
MAX(Quick cooling) and ECO (Energy-saving) mode. Only press the button
briefly to 'toggle' between MAX/ECO.
briefly to 'toggle' between MAX/ECO.
TIP:
TIP:
Keep a close eye on the LED display screen when holding down the SETTINGS
Keep a close eye on the LED display screen when holding down the SETTINGS
button. If you hold down for too long, it is easy to accidentally find yourself in the
button. If you hold down for too long, it is easy to accidentally find yourself in the
12/24v
and you leave the
vehicle is stationary/parked
will last. So, we recommend that