Clarke ECSS-1 Manual Perakitan dan Instruksi - Halaman 7

Jelajahi secara online atau unduh pdf Manual Perakitan dan Instruksi untuk Alat Listrik Clarke ECSS-1. Clarke ECSS-1 16 halaman. Chainsaw sharpener

ASSEMBLY

The chain saw sharpener is supplied only partly assembled.

1. Remove the bolts from both

pivot clamps as shown in Fig 4.

2. Insert the axle into the body of

the chainsaw sharpener. Fig 5.

3. Place the chainsaw sharpener

on the base plate.

•

Make sure the nipple on the

chainsaw sharpener is

positioned inside the depth

limiter (N) spring as shown in

Fig 6.

4. Replace the pivot clamps and

secure in place using the bolts

removed in step 1.

Note: Before starting the unit,

make sure the grinding

disc is fixed firmly. Never

operate the unit without the

protective cover.

5. Place the base plate (A) on a

solid, level surface, e.g. a

workbench. Fig 7.

•

Ensure that the base plate

extends out far enough over

the edge of the work bench

so that the chain can hang

down freely and you can

easily access the angle

adjustment screw (L) at the

bottom.

6. Mount the base plate (A) using

the mounting holes (O).

The chain saw sharpener is now

ready for use.

Fig 4

Fig 5

Fig 7

Fig 6