ALE Coral 144 Panduan Operator - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Operator untuk Printer ALE Coral 144. ALE Coral 144 18 halaman.

ALE

2.2

Inking up for the first time "from dry"

It is recommended that the printer is removed from the production line

during this procedure as there is a risk of ink spillage. Fix the printer to a

suitable support.

Support the Coral print-head to a floor-stand, in printing position.

●

With the controller switched off, connect it to the print-head using the data cables

●

from the Coral print-head.

Remove the air pins from the ink trays (Fig. 12). Those pins prevent leaks from the

●

reservoirs

Fig. 12: Remove air pins and caps

Place a collecting bucket in front of the print-head (Fig. 13).

●

Fit

Solvant colour ink bottles in the correct reservoirs

ALE

●

SAFETY WARNING! The inks and solvent cleaners are chemical

products. In the interests of safety, read the Material Safety Data

Sheets carefully before handling the fluids. Always wear protective

gloves and eye protection when in contact with any inks or solvents.

The Coral 144-S has been specially built to be used with

other fluid is likely to severely damage the hydraulic system.

Coral144 Operator Manual

Design • Print • Trace

during

shipment.

Also

remove

the

Fig. 13: Place a collecting bucket in

ALE

caps

from

the

front of the print-head

Solvant colour inks. Using any

03/12/2010

reservoirs.