Zanussi ZBB5284 Panduan Pengguna - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kulkas Zanussi ZBB5284. Zanussi ZBB5284 16 halaman. Fridge-freezer

Halaman Cetak

Replacing the lamp

Caution! Disconnect the plug from the mains

socket.

1. Remove the screw

from the lamp cov-

er.

2. Remove the lamp

cover (refer to the

illustration).

3. Replace the used

lamp with a new

lamp of the same

Technical data

Dimension of the recess

Rising Time

Voltage

Frequency

The technical information are situated in the rating plate

on the internal left side of the appliance and in the energy

label.

Installation

Caution! Read the "Safety Information" carefully for

your safety and correct operation of the appliance

before installing the appliance.

Positioning

Install this appliance at a location where the ambient tem-

perature corresponds to the climate class indicated on the

rating plate of the appliance:

4. Install the lamp cover.

5. Tighten the screw to the lamp cover.

6. Connect the plug to the mains socket.

7. Open the door. Make sure that the light comes on.

Closing the door

1. Clean the door gaskets.

2. If necessary, adjust the door. Refer to "Installation".

3. If necessary, replace the defective door gaskets. Con-

Height

Width

Depth

Climate

Electrical Connection

electrician or competent person.

power and specifically designed for household appli-

ances (the maximum power is shown on the lamp

cover).

tact the Service Center.

1780 mm

560 mm

550 mm

18 h

230-240 V

50 Hz

Ambient temperature

class

+10°C to + 32°C

+16°C to + 32°C

+16°C to + 38°C

+16°C to + 43°C

Caution! Any electrical work required to install this

appliance should be carried out by a qualified