Zanussi ZFC244-1 Buklet Instruksi - Halaman 7

Jelajahi secara online atau unduh pdf Buklet Instruksi untuk Kulkas Zanussi ZFC244-1. Zanussi ZFC244-1 12 halaman. Refrigerator zfc244-1

Inner door reversal

Using a screwdriver release bracket (1) by pressing

on the internal spring (Fig. 6) and withdraw it from its

seat together with the door;

remove plug (2) and ﬁt it in the hole left open on the

opposite side;

turn the door through 180 , remove the bracket (1)

and reﬁt it on the opposite side.

Reﬁt the door and insert the top pin and bottom

bracket (1), pushing it into place.

To ensure correct storage of food, the door is ﬁtted

with a simple spring device which holds it in the open

position until it is properly closed.

Before plugging in, ensure that the voltage and

frequency shown on the serial number plate

correspond to your domestic power supply.

Voltage can vary by 6% of the rated voltage.

For operation with different voltages, a suitably sized

auto-transformer must be used.

The technical data is indicated in the rating plate on the left side inside the appliance.

TECHNICAL SPECIFICATION

180°

PR140

Fig. 6