Zanussi ZFT 140 Buklet Instruksi - Halaman 10

Jelajahi secara online atau unduh pdf Buklet Instruksi untuk Kulkas Zanussi ZFT 140. Zanussi ZFT 140 10 halaman. Refrigerators zft 140; zfc 140 t

Unplug the appliance before carrying out any

maintenance operation.

Clean the inside with warm water and bicarbonate of

soda.

Clean the outside with a silicone wax spray.

Clean the condenser and compressor with a brush or

vacuum cleaner. This will improve performance and

consequently save on electricity.

If a fault occurs, check:

– that the plug is correctly inserted in the socket;

– that the socket is powered;

– that the thermostat dial is correctly positioned.

MAINTENANCE

If you are not using the appliance for any length of

time, the following precautions should be taken:

unplug the appliance;

take all food out;

defrost and clean the inside and all the accessories;

leave the door ajar so that air can circulate inside in

order to prevent unpleasant smells forming.

The opening on the diffuser gives access to the light

bulb.

If the light does not come on when the door is opened,

check that the bulb is screwed in properly; replace the

bulb if the fault persists.

The rating is shown on the light bulb cover.

Also check the following:

If the appliance is very noisy, check that the sides are

not vibrating against adjacent kitchen units and that

the refrigeration unit pipes are not vibrating.

If the fault persists after carrying out the above

checks, call your nearest Servicing Centre.

For quick service it is important when telephoning

to give the number of the model and the serial

number, both of which can be found on the serial

number plate inside at the bottom left of the

appliance.