Zanussi ZI 7280 D Buklet Instruksi - Halaman 6

Jelajahi secara online atau unduh pdf Buklet Instruksi untuk Kulkas Zanussi ZI 7280 D. Zanussi ZI 7280 D 11 halaman.

Open both the appliance door and that of the

Fig. 9

kitchen unit to approx. 90¡. Place the little plates

8mm

over the runners. Hold the doors of the appliance

and the unit together and mark the holes.

PR34

Remove the little plates and make the holes with

Fig. 10

a diam. of 2 mm. Replace the little platee over

the runners and screw in the screws provided

(3.5x16 mm).

For the alignment of the kitchen unit door, if

necessary, use the clearance size of the slotted

holes. At the end of the procedure, check that

the doors of the appliance and the kitchen unit

open properly.

PR35

Fig. 11

If the appliance is to be fitted laterally to the

kitchen unit, it will be sufficient to loosen the

screws of the little plates (G), move them as

shown in Fig. 11 and then fasten them up again.

Fit the cover (H).

D729

Electrical connection

Before plugging in, ensure that the voltage and frequency shown on the serial number plate

correspond to your domestic power supply. Voltage can vary by ±6% of the rated voltage. For

operation with different voltages, a suitably sized auto-transformer must be used.

TECHNICAL SPECIFICATIONS

The technical data is indicated in the rating plate on the left side inside the appliance.