Zanussi ZK 56/48 RAL Buklet Instruksi - Halaman 18

Jelajahi secara online atau unduh pdf Buklet Instruksi untuk Kulkas Zanussi ZK 56/48 RAL. Zanussi ZK 56/48 RAL 18 halaman. Fridge freezer
Juga untuk Zanussi ZK 56/48 RAL: Buklet Instruksi (18 halaman), Buklet Instruksi (18 halaman)

Halaman Cetak

Door reversal directions

1. Disconnect from the electricity supply.

2. Remove all loose items, including food, store food

in a cool place.

3. Gently lay the fridge/freezer on its back with the

top held away from the floor by 5-8 cm (2-3

inches) of packing;

4. Remove the ventilation grill (D).

5. Remove bottom hinge (E).

6. Remove the freezer door by releasing it from the

middle hinge (H).

7. Unscrew the middle hinge.

8. Slide out the fridge door from pin (G), unscrew

the latter and then screw it down into the hinge

provided on the opposite side, after having

removed the small plugs (I) which should then be

fitted on the opposite side.

9. Refit the fridge door and replace the middle hinge

to the left hand side.

10.Replace the fridge door.

11. Screw down the bottom hinge (E) on the opposite

side by using the screws previously removed..

12.Remove the plug (F) from the ventilation grill (D)

and replace it on the opposite side.

13.Re-assemble the ventilation grill (D).

Attention

After completion of the door reversing operation,

check that the door gasket adheres to the cabinet. If

the ambient temperature is cold (i.e. in Winter), the

gasket may not fit perfectly to the cabinet. In that

case, wait for the natural fitting of the gasket or

accelerate this process by heating up the part

involved with a normal hairdrier.