Zanussi ZRA33400WA Panduan Pengguna - Halaman 11
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kulkas Zanussi ZRA33400WA. Zanussi ZRA33400WA 28 halaman. Refrigerator
Juga untuk Zanussi ZRA33400WA: Panduan Pengguna (12 halaman)
Halaman Cetak
• Unscrew the lower pin and the washers (3)
• Position the pin and the washers (6) on the
opposite side (7).
• Unscrew the other hinge (5)
6
• Unscrew the upper pin (4) and screw it on
the opposite side. (5)
• Refit the door.
• Refit and screw both lower hinges.
www.zanussi.com
3
2
1
7
8
• Refit the plinth (8).
4
• Stand the appliance upright.
• Unscrew the handle (1) and fix it on the op-
posite side (2).
• Re-insert the cover pins (3) on the opposite
side.
1
3
2
Do a final check to make sure that:
• All screws are tightened.
• The edges of the doors run parallel to the
side edge of the appliance.
• The magnetic seal adheres to the cabinet.
• The door opens and closes correctly.
It is advisable to wait at least four hours before
connecting the appliance to allow the oil to
flow back in the compressor.
If the ambient temperature is cold (i.e. in Win-
ter), the gasket may not fit perfectly to the cab-
inet. In that case, wait for the natural fitting of
the gasket.
In case you do not want to carry out the above
mentioned operations, contact the nearest Af-
ter Sales Service Force. The After Sales Serv-
ice specialist will carry out the reversibility of
the doors at your cost.
5
11