Zanussi ZRA40400XA Panduan Pengguna - Halaman 9
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kulkas Zanussi ZRA40400XA. Zanussi ZRA40400XA 16 halaman.
Halaman Cetak
Technical data
Dimension of the recess
Voltage
Frequency
The technical information are situated in the rat-
ing plate on the internal left side of the appli-
ance and in the energy label.
Installation
Caution! Read the "Safety Information"
carefully for your safety and correct
operation of the appliance before installing the
appliance.
Positioning
Install this appliance at a location where the
ambient temperature corresponds to the cli-
mate class indicated on the rating plate of the
appliance:
Climate
Ambient temperature
class
SN
+10°C to + 32°C
N
+16°C to + 32°C
ST
+16°C to + 38°C
T
+16°C to + 43°C
Location
The appliance should be installed well away
from sources of heat such as radiators, boilers,
direct sunlight etc. Ensure that air can circulate
freely around the back of the cabinet. To ensure
best performance, if the appliance is positioned
below an overhanging wall unit, the minimum
distance between the top of the cabinet and
the wall unit must be at least 100 mm . Ideally,
however, the appliance should not be posi-
tioned below overhanging wall units. Accurate
www.zanussi.com
Height
Width
Depth
levelling is ensured by one or more adjustable
feet at the base of the cabinet.
power supply; the plug must therefore be easily
accessible after installation.
Electrical Connection
by a qualified electrician or competent person.
1854 mm
595 mm
658 mm
230-240 V
50 Hz
Warning! It must be possible to
disconnect the appliance from the mains
A
Caution! Any electrical work required to
install this appliance should be carried out
B
9