Zanussi ZRX307W Panduan Pengguna - Halaman 16

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kulkas Zanussi ZRX307W. Zanussi ZRX307W 44 halaman.

Halaman Cetak

Important! Do not pull, move or damage any pipes and/

or cables inside the cabinet.

Never use detergents, abrasive powders, highly

perfumed cleaning products or wax polishes to clean

the interior as this will damage the surface and leave a

strong odour.

Clean the condenser (black grill) and the compressor at

the back of the appliance with a brush or a vacuum clean-

er. This operation will improve the performance of the

appliance and save electricity consumption.

Important! Take care of not to damage the cooling system.

Many proprietary kitchen surface cleaners contain chem-

icals that can attack/damage the plastics used in this ap-

pliance. For this reason it is recommended that the out-

er casing of this appliance is only cleaned with warm wa-

ter with a little washing-up liquid added.

After cleaning, reconnect the equipment to the mains

supply.

Defrosting of the ice-maker compartment

A certain amount of frost will always form around

the ice-maker compartment.

Important! Defrost the ice-maker compartment when

the frost layer reaches a thickness of about 3-5 mm.

To remove the frost, do these steps:

1. Turn the Temperature regulator to the "0" setting

and disconnect the mains plug from the mains socket.

What to do if...

Warning! Before troubleshooting, disconnect the

mains plug from the mains socket.

Only a qualified electrician or competent person must

do the troubleshooting that is not in this manual.

Important! There are some sounds during normal use

(compressor, refrigerant circulation).

Problem

The appliance is noisy

The appliance does not operate. The appliance is switched off.

Possible cause

The appliance is not supported prop-

erly

The mains plug is not connected to

the mains socket correctly.

2. Empty the ice box.

3. Leave the door of the appliance and ice-maker com-

partment open.

4. Defrosting usually takes several hours. When finish-

ed, pour defrost water gathered out of the tray and

wipe the surfaces dry.

5. Insert the plug into the wall socket and turn the ther-

mostat control to a medium setting.

Warning! Never use sharp metal tools to scrape

off frost from the evaporator as you could damage

it. Do not use a mechanical device or any artificial

means to speed up the thawing process other than

those recommended by the manufacturer.

Periods of non-operation

When the appliance is not in use for long periods, take

the following precautions:

1. disconnect the appliance from electricity supply

2. remove all food

3. defrost and clean the appliance and all accessories

4. leave the door/doors open to prevent unpleasant

smells.

Important! If the cabinet will be kept on, ask somebody

to check it once in a while to prevent the food inside

from spoiling in case of a power failure.

Important! The appliance operates discontinuously, so

the stopping of compressor does not mean being no

current. That is why you must not touch the electrical

parts of the appliance before breaking the circuit.

Check if the appliance stands stable

(all the four feet should be on the floor)

Switch on the appliance.

Connect the mains plug to the mains

socket correctly.

Solution