Zanussi ZU 7115 Buklet Instruksi - Halaman 8

Jelajahi secara online atau unduh pdf Buklet Instruksi untuk Kulkas Zanussi ZU 7115. Zanussi ZU 7115 16 halaman. Larder-refrigerator
Juga untuk Zanussi ZU 7115: Buklet Instruksi (20 halaman)

Halaman Cetak

Check the position again by slackening the

Fig. 10

screws and pins then, once the best position

has been obtained, fully tighten all the fixings.

Cover the visible part of the top bracket on the

panel with plastic cover (D), inserting it in the

locations provided in the bracket.

D472

Once the door has ben correctly aligned, tighten

Fig. 11

the holding nuts on the fixing brackets and

attach the appliance to the adjacent units and

the bottom of the work surface (Fig. 11).

D517

For a correct installation operation if the base

Fig. 12

plate is more than 100 mm (for cavity height

820 mm) or more than 150 mm (for cavity

height 870 mm) you must cut out the plate as

shown in Fig. 12.

D593