Zanussi ZXAN13FW0 Panduan Pengguna - Halaman 9
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kulkas Zanussi ZXAN13FW0. Zanussi ZXAN13FW0 17 halaman.
Halaman Cetak
Install the door equipment.
OPERATION
SWITCHING ON
1. Insert the plug into the wall socket.
2. Turn the temperature regulator clockwise to a
medium setting.
SWITCHING OFF
To turn off the appliance, turn the temperature
regulator to the "0" position.
You can also unplug the appliance.
TEMPERATURE REGULATION
The temperature is regulated automatically.
However, you can set a temperature inside the
appliance yourself.
Choose the setting keeping in mind that the
temperature inside the appliance depends on:
DAILY USE
CAUTION! This refrigerating
appliance is not suitable for freezing
foodstuffs.
REMOVING AND INSTALLING THE DOOR
SHELF
To remove the door shelf:
1. Hold the left side of the shelf.
2. Lift the right side of the shelf until it comes free
from the fastener.
3. Lift the left side of the shelf and remove it.
To put the shelf back in:
1. Place the shelf flat on the door.
Wait at least 4 hours before connecting the
appliance to the power supply.
•
room temperature,
•
frequency of opening the door,
•
quantity of food stored,
•
appliance location.
A medium setting is generally the most suitable
one.
To operate the appliance:
1. Turn the temperature regulator clockwise to
obtain a lower temperature inside the
appliance.
2. Turn the temperature regulator
counterclockwise to obtain a higher
temperature inside the appliance.
Setting "0" means that the appliance is switched
off.
2. Push two sides of the shelf downwards at the
same time so that the shelf fits both fasteners.
MOVABLE SHELVES
The walls of the refrigerator compartment are
equipped with a series of runners so that the
shelves can be positioned as desired.
To ensure correct air circulation, do
not move the glass shelf above the
vegetable drawer.
VEGETABLE DRAWER
There is a special drawer in the bottom part of the
appliance suitable for storage of fruits and
vegetables.
9