Zanussi ZOB 668 Buklet Instruksi - Halaman 20

Jelajahi secara online atau unduh pdf Buklet Instruksi untuk Oven Zanussi ZOB 668. Zanussi ZOB 668 24 halaman.
Juga untuk Zanussi ZOB 668: Buku Instruksi (24 halaman)

Halaman Cetak

Instructions for the installer

The instructions given below are

designed specifically for a qualified

installer and should aid him or her to

perform all installation, adjustment,

and maintenance operations with

absolute precision and in compliance

with all current legislation and

regulations. We strongly recommend

that all operations for the installation

of your appliance be carryed out by

Qualified Personnel in accordance

with existing rules and regulations.

Electrical connection

Prior to making the electrical connection,

make sure that:

— the protection fuse and the domestic

wiring system are suitable to carry the

total electric load of the oven (see rating

plate);

— your domestic wiring system has an

efficient earth connection in compliance

with rules and laws in force;

— the wall socket or the omnipole switch

used for the electrical connection can

easily be reached after the oven is built

in.

This appliance is supplied with a connection

cable incorporating a standard plug, suitable

for the total electric load shown on the rating

plate. The plug is to be inserted into a suitable

wall socket. If you require a direct

connection to the electric network (mains),

it will be necessary to fit between the

appliance and the mains an omnipole switch,

with a minimum gap between contacts of 3

mm, suitable for the required load and in

compliance with rules in force. The green &

yellow ground wire must not be interrupted

by the switch and it should be 2-3 cm longer

than the other cables. The supply cable must