Zanussi ZOB 985 QP Buku Petunjuk - Halaman 16

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Oven Zanussi ZOB 985 QP. Zanussi ZOB 985 QP 25 halaman.

Halaman Cetak

To programme the pyrolytic

cleaning cycle (delayed start,

automatic stop)

If you desire, you can programme the starting and end-

ing time of the pyrolytic cleaning cycle.

1. Press button

to switch on the oven. Press the

button as often as necessary, until the "Pyro"

function symbol

display.

2. The Cooking Duration symbol

seconds; during this time push ' ' or ' ' buttons to

select the pyrolytic 1 (P I) or pyrolytic 2 (P 2) func-

tion.

3. Once you have chosen the desired pyrolytic func-

tion, "Pyro" will flash in the display waiting for confir-

mation to start the pyro cleaning function.

At this time, push the time function button

(Fig. 22). The "End of Cooking" symbol

the arrow symbol

will display the end of the cleaning cycle (that is,

the actual time + cooking duration time).

Push ' ' or ' ' buttons to select the required end of

cycle time (Fig. 22). Then, the "Pyro" writing stops

flashing, the oven lamp switches off and the pyrolytic

cleaning cycle starts at the set time.

4. After some time, the door lock will be activated and

the related symbol

At the end of the pyrolitic cleaning process, the display

shows the time of day. The oven door is locked.

Once the oven has cooled down, an acoustic signal will

be emitted and the door will unlock.

To stop the pyrolytic cleaning cycle at any time, press

button

Replacing the Oven Light

If the oven bulb needs replacing, it must comply with the

following specifications:

- Power: 40 W,

- Voltage: 230 V (50 Hz),

- Temperature Rating of 300 °C,

- Thread type: E14.

These bulbs are available from your local Service Force

Centre.

To replace the faulty bulb (Fig. 23):

1. Ensure the oven is disconnected from the electrical

supply.

2. Turn the glass cover anticlockwise.

3. Remove the faulty bulb and replace with the new one.

4. Refit the glass cover.

5. Reconnect to the electrical supply.

(level 1 - P I) appears in the

will flash for some

will flash. The control panel

will be displayed.

and

Fig. 23

Fig. 22