Zanussi ZOHKF1X1 Panduan Pengguna - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Oven Zanussi ZOHKF1X1. Zanussi ZOHKF1X1 28 halaman.

Halaman Cetak

• To remove the shelf supports first pull the front of the shelf

support and then the rear end away from the side walls.

Install the shelf supports in the opposite sequence.

• Do not use a steam cleaner to clean the appliance.

• Do not use harsh abrasive cleaners or sharp metal scrapers

to clean the glass door since they can scratch the surface,

which may result in shattering of the glass.

2. SAFETY INSTRUCTIONS

2.1 Installation

WARNING!

Only a qualified person must install this

appliance.

• Remove all the packaging.

• Do not install or use a damaged

appliance.

• Follow the installation instructions supplied

with the appliance.

• Always take care when moving the

appliance as it is heavy. Always use safety

gloves and enclosed footwear.

• Do not pull the appliance by the handle.

• Install the appliance in a safe and suitable

place that meets installation requirements.

• Keep the minimum distance from other

appliances and units.

• Before mounting the appliance, check if

the appliance door opens without restraint.

• The appliance is equipped with an electric

cooling system. It must be operated with

the electric power supply.

Cabinet minimum height

(Cabinet under the worktop

minimum height)

Cabinet width

Cabinet depth

Height of the front of the

appliance

Height of the back of the

appliance

Width of the front of the ap‐

pliance

ENGLISH

2.2 Electrical connection

• All electrical connections should be made

• The appliance must be earthed.

590 (600) mm

• Make sure that the parameters on the

560 mm

• Always use a correctly installed

550 (550) mm

• Do not use multi-plug adapters and

594 mm

• Make sure not to cause damage to the

576 mm

595 mm

Width of the back of the ap‐

pliance

Depth of the appliance

Built in depth of the appli‐

ance

Depth with open door

Ventilation opening mini‐

mum size. Opening placed

on the bottom rear side

Mains supply cable length.

Cable is placed in the right

corner of the back side

Mounting screws

WARNING!

Risk of fire and electric shock.

by a qualified electrician.

rating plate are compatible with the

electrical ratings of the mains power

supply.

shockproof socket.

extension cables.

mains plug and to the mains cable. Should

the mains cable need to be replaced, this

must be carried out by our Authorised

Service Centre.

559 mm

569 mm

548 mm

1022 mm

560x20 mm

1500 mm

4x25 mm