Zanussi ZOP37962 Panduan Pengguna - Halaman 23
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Oven Zanussi ZOP37962. Zanussi ZOP37962 28 halaman.
Problem
The display shows an error code
that is not in this table.
The appliance is activated and
does not heat up. The fan does
not operate. The display shows
"Demo".
Service data
If you cannot find a solution to the problem
yourself, contact your dealer or an Authorised
Service Centre.
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
Installation
WARNING!
Refer to Safety chapters.
www.zanussi.com
Possible cause
There is an electrical fault.
The demo mode is activated.
We recommend that you write the data here:
•
Deactivate the oven with the
house fuse or the safety
switch in the fuse box and ac-
tivate it again.
•
If the display shows the error
code again, contact the Cus-
tomer Care Department.
1. Deactivate the oven.
2. Press and hold the button
3. When an acoustic signal
4. Turn the knob for the oven
5. Release the button
6. Turn the knob for the tem-
The necessary data for the service centre is on
the rating plate. The rating plate is on the front
frame of the appliance cavity. Do not remove
the rating plate from the appliance cavity.
.........................................
.........................................
.........................................
Remedy
.
sounds, turn the knob for the
oven functions clockwise to
the first function. "Demo"
flashes in the display.
functions to the off position.
perature clockwise and hold
it for three seconds. The
acoustic signal sounds three
times. The demo mode is de-
activated.
.
23